Motorola 68k based CPUS

From SizeCoding
Revision as of 05:33, 6 July 2020 by Superogue (talk | contribs)

Jump to: navigation, search


Wanting to start sizecoding on a Motorola 68k platform in this day and age can be tough.

So here is a bit of help to get you started:

The Motorola 68k processor

The Motorola 68k processor...

Note: Assigment direction is source,dest instead of dest,source !!!


To be added.

Atari ST

The Atari ST systems consists of the M68k system with custom hardware for graphics and sound.

Setting up

Setting up your development platform for the Atari ST systems is quite easy, first get the following tools:

  • Assembler: VASM - This assembler is able to assemble directly to a TOS image
  • Emulator(s): -. Make sure to use the original TOS 1.62 Image for best compatibility.

Compiling to a TOS image

Vasm -Ftos source.s -o source.tos

Video display

The Atari ST has a linear 320x200x4bit address space, which each nibble representing a color index 0..F from the palette.

To be added soon.

Setting a palette

Here is some code that will help you setup a palette

pea	palette(pc)
	move.w	#6,-(sp)
	trap	#14

; Palette data
	dc.w	$000,$100,$200,$311,$422,$533,$644,$755
	dc.w	$575,$464,$353,$242,$131,$020,$010,$000

Getting something on screen

Here is a bit of code to get you started:

	; Line-A Initialization
; After calling this function, data register D0 and address register A0 point to a table ; with the starting address of the Line A variables. 
; Address register A1 points to a table with the starting addresses for the three system ; font headers, 
; and address register A2 points to a table that specifies the starting addresses of the; 15 Line A opcodes. There's no parameter required for this function, so all you have
; to do is call the word opcode label that you specified for the $A000 (Initialize)
; function.
	dc.w	$A000
	movem.l	(a0),a1-a4		; A3=INTIN, A4=PTSIN

	; For X&Y
	move.w	#200-1,d7		; y
	move.w	#320-1,d6		; x

	; Putpixel
	move.b d6,d0		; d0=x
	eor d7,d0			; d0=x^y
	lsr.b #2,d0			; d0>>=4
	and #42,d0			; d0&42
	move.w	d0,(a3)		; a3=color(d0)
	movem.w	d6/d7,(a4)	; a4=x,y`
	dc.w	$A001		; put pixel command

	dbra	d6,xLoop		; decrease and branch
    dbra	d7,yLoop

; Wait loop
	bra frameloop ; .s	*


The Atari ST systems use the YM8192 chip to generate sound. To be added soon.

Make some noise

To be added soon.

Additional Resources

Sizecoding on the Atari ST is not very huge yet, so resources are sparse.

  • Spkr's Github: to be added

Commodore Amiga

The Commodore Amiga system consists of the M68k system with custom hardware for graphics and sound.

Setting up

  • Assembler: -
  • Emulator(s): WinUAE

Video display

No information yet


No information yet