Difference between revisions of "Sega MegaDrive"
From SizeCoding
| Line 100: | Line 100: | ||
<syntaxhighlight lang=""> | <syntaxhighlight lang=""> | ||
| + | Start address End address Description 32X SH-2 address | ||
| + | $000000 $3FFFFF Cartridge ROM/RAM $2000000-$23FFFFF | ||
| + | $400000 $7FFFFF Reserved (used by the Mega-CD and 32X) | ||
| + | $800000 $9FFFFF Reserved (used by the 32X) | ||
| + | $840000 $85FFFF 32X frame buffer $4000000-$401FFFF | ||
| + | $860000 $87FFFF 32X frame buffer overwrite mode $4020000-$403FFFF | ||
| + | $880000 $8FFFFF 32X cartridge ROM (first 512kB bank only) | ||
| + | $900000 $9FFFFF 32X cartridge bankswitched ROM (any 512kB bank, controlled by 32X registers) | ||
| + | $A00000 $A0FFFF Z80 memory space | ||
| + | $A10000 $A10001 Version register | ||
| + | $A10002 $A10003 Controller 1 data | ||
| + | $A10004 $A10005 Controller 2 data | ||
| + | $A10006 $A10007 Expansion port data | ||
| + | $A10008 $A10009 Controller 1 control | ||
| + | $A1000A $A1000B Controller 2 control | ||
| + | $A1000C $A1000D Expansion port control | ||
| + | $A1000E $A1000F Controller 1 serial transmit | ||
| + | $A10010 $A10011 Controller 1 serial receive | ||
| + | $A10012 $A10013 Controller 1 serial control | ||
| + | $A10014 $A10015 Controller 2 serial transmit | ||
| + | $A10016 $A10017 Controller 2 serial receive | ||
| + | $A10018 $A10019 Controller 2 serial control | ||
| + | $A1001A $A1001B Expansion port serial transmit | ||
| + | $A1001C $A1001D Expansion port serial receive | ||
| + | $A1001E $A1001F Expansion port serial control | ||
| + | $A10020 $A10FFF Reserved | ||
| + | $A11000 Memory mode register | ||
| + | $A11002 $A110FF Reserved | ||
| + | $A11100 $A11101 Z80 bus request | ||
| + | $A11102 $A111FF Reserved | ||
| + | $A11200 $A11201 Z80 reset | ||
| + | $A11202 $A12FFF Reserved | ||
| + | $A13000 $A130FF TIME registers; used to send signals to the cartridge | ||
| + | $A130EC $A130EF "MARS" when 32X is attached | ||
| + | $A130F1 SRAM access register | ||
| + | $A130F3 Bank register for address $80000-$FFFFF | ||
| + | $A130F5 Bank register for address $100000-$17FFFF | ||
| + | $A130F7 Bank register for address $180000-$1FFFFF | ||
| + | $A130F9 Bank register for address $200000-$27FFFF | ||
| + | $A130FB Bank register for address $280000-$2FFFFF | ||
| + | $A130FD Bank register for address $300000-$37FFFF | ||
| + | $A130FF Bank register for address $380000-$3FFFFF | ||
| + | $A14000 $A14003 TMSS "SEGA" | ||
| + | $A14101 TMSS/cartridge register | ||
| + | $A14102 $BFFFFF Reserved | ||
| + | $C00000 $C00001 VDP data port | ||
| + | $C00002 $C00003 VDP data port (mirror) | ||
| + | $C00004 $C00005 VDP control port | ||
| + | $C00006 $C00007 VDP control port (mirror) | ||
| + | $C00008 $C00009 VDP H/V counter | ||
| + | $C0000A $C0000F VDP H/V counter (mirror) | ||
| + | $C00011 PSG output | ||
| + | $C00013 $C00017 PSG output (mirror) | ||
| + | $C0001C $C0001D Debug register | ||
| + | $C0001E $C0001F Debug register (mirror) | ||
| + | $C00020 $FEFFFF Reserved | ||
| + | $FF0000 $FFFFFF 68000 RAM | ||
</syntaxhighlight> | </syntaxhighlight> | ||
Revision as of 16:46, 18 December 2025
Contents
SEGA MegaDrive / Genesis
The SEGA MegaDrive / Genesis is a 16-bit videogame console released by SEGA in 1989.
It features: - 320x240 resolution (PAL) - 4x 16 color palettes - Tile based display chip with 2 scrolling tilemaps - 64 Sprites (up to 4x4tiles in size each) - 64K of dedicated Video Memory (VRAM) - YM2612 Sound Chip
Setting up
- Assembler: VASM
- Emulator(s): BlastEm ( https://www.retrodev.com/blastem/ )
- Tool(s): MDTools ( https://github.com/sikthehedgehog/mdtools )
- Hardware: Sega MegaDrive / Genesis console with a way to access ROM files.
The real hardware and BlastEm emulator don't require exact ROM headers, but you might want to distribute an emulator friendly version of your production as well for broader emulator compatibility.
CPU Vector table
This must be the very first thing in the ROM, since the CPU reads it from 0x0000 on bootup. The Vector table is a table of addresses that the CPU needs to know about - things like stack address, "main()" function address, vertical/horizontal interrupt addresses, etc. For any interrupts we don't want to handle, we specify INT_Null (an interrupt at the bottom of the file that doesn't do anything).
dc.l 0x00FFE000 ; Initial stack pointer value
dc.l CPU_EntryPoint ; Start of program
dc.l CPU_Exception ; Bus error
dc.l CPU_Exception ; Address error
dc.l CPU_Exception ; Illegal instruction
dc.l CPU_Exception ; Division by zero
dc.l CPU_Exception ; CHK CPU_Exception
dc.l CPU_Exception ; TRAPV CPU_Exception
dc.l CPU_Exception ; Privilege violation
dc.l INT_Null ; TRACE exception
dc.l INT_Null ; Line-A emulator
dc.l INT_Null ; Line-F emulator
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Spurious exception
dc.l INT_Null ; IRQ level 1
dc.l INT_Null ; IRQ level 2
dc.l INT_Null ; IRQ level 3
dc.l INT_HInterrupt ; IRQ level 4 (horizontal retrace interrupt)
dc.l INT_Null ; IRQ level 5
dc.l INT_VInterrupt ; IRQ level 6 (vertical retrace interrupt)
dc.l INT_Null ; IRQ level 7
dc.l INT_Null ; TRAP #00 exception
dc.l INT_Null ; TRAP #01 exception
dc.l INT_Null ; TRAP #02 exception
dc.l INT_Null ; TRAP #03 exception
dc.l INT_Null ; TRAP #04 exception
dc.l INT_Null ; TRAP #05 exception
dc.l INT_Null ; TRAP #06 exception
dc.l INT_Null ; TRAP #07 exception
dc.l INT_Null ; TRAP #08 exception
dc.l INT_Null ; TRAP #09 exception
dc.l INT_Null ; TRAP #10 exception
dc.l INT_Null ; TRAP #11 exception
dc.l INT_Null ; TRAP #12 exception
dc.l INT_Null ; TRAP #13 exception
dc.l INT_Null ; TRAP #14 exception
dc.l INT_Null ; TRAP #15 exception
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)
dc.l INT_Null ; Unused (reserved)This vector table is then followed by the ROM header at 0x100
ROM Header
The ROM Header is a structure located at 0x100 that specifies some metadata about the ROM, like its name, author, version number, release date, region, and any special peripherals used.
Note that the Mega Drive console itself doesn't read any of this, it's more a convenience for the programmer, but most emulators will read the title and region. Further header information at: https://plutiedev.com/rom-header
Memory map
Start address End address Description 32X SH-2 address
$000000 $3FFFFF Cartridge ROM/RAM $2000000-$23FFFFF
$400000 $7FFFFF Reserved (used by the Mega-CD and 32X)
$800000 $9FFFFF Reserved (used by the 32X)
$840000 $85FFFF 32X frame buffer $4000000-$401FFFF
$860000 $87FFFF 32X frame buffer overwrite mode $4020000-$403FFFF
$880000 $8FFFFF 32X cartridge ROM (first 512kB bank only)
$900000 $9FFFFF 32X cartridge bankswitched ROM (any 512kB bank, controlled by 32X registers)
$A00000 $A0FFFF Z80 memory space
$A10000 $A10001 Version register
$A10002 $A10003 Controller 1 data
$A10004 $A10005 Controller 2 data
$A10006 $A10007 Expansion port data
$A10008 $A10009 Controller 1 control
$A1000A $A1000B Controller 2 control
$A1000C $A1000D Expansion port control
$A1000E $A1000F Controller 1 serial transmit
$A10010 $A10011 Controller 1 serial receive
$A10012 $A10013 Controller 1 serial control
$A10014 $A10015 Controller 2 serial transmit
$A10016 $A10017 Controller 2 serial receive
$A10018 $A10019 Controller 2 serial control
$A1001A $A1001B Expansion port serial transmit
$A1001C $A1001D Expansion port serial receive
$A1001E $A1001F Expansion port serial control
$A10020 $A10FFF Reserved
$A11000 Memory mode register
$A11002 $A110FF Reserved
$A11100 $A11101 Z80 bus request
$A11102 $A111FF Reserved
$A11200 $A11201 Z80 reset
$A11202 $A12FFF Reserved
$A13000 $A130FF TIME registers; used to send signals to the cartridge
$A130EC $A130EF "MARS" when 32X is attached
$A130F1 SRAM access register
$A130F3 Bank register for address $80000-$FFFFF
$A130F5 Bank register for address $100000-$17FFFF
$A130F7 Bank register for address $180000-$1FFFFF
$A130F9 Bank register for address $200000-$27FFFF
$A130FB Bank register for address $280000-$2FFFFF
$A130FD Bank register for address $300000-$37FFFF
$A130FF Bank register for address $380000-$3FFFFF
$A14000 $A14003 TMSS "SEGA"
$A14101 TMSS/cartridge register
$A14102 $BFFFFF Reserved
$C00000 $C00001 VDP data port
$C00002 $C00003 VDP data port (mirror)
$C00004 $C00005 VDP control port
$C00006 $C00007 VDP control port (mirror)
$C00008 $C00009 VDP H/V counter
$C0000A $C0000F VDP H/V counter (mirror)
$C00011 PSG output
$C00013 $C00017 PSG output (mirror)
$C0001C $C0001D Debug register
$C0001E $C0001F Debug register (mirror)
$C00020 $FEFFFF Reserved
$FF0000 $FFFFFF 68000 RAMVideo display
To be added.
VDP
To be added.
to be addedFor more information, check out https://plutiedev.com/vdp-setup
Sprites
To be added
; to be addedSound
To be added.
; to be added
