- 1 Outputting to the screen
- 1.1 Outputting in Textmode (80x25)
- 1.2 Outputting in mode 13h (320x200)
- 2 Producing sound
- 2.1 MIDI notes
- 2.2 PC Speaker
- 2.3 COVOX output (aka LPT DAC)
- 2.4 Advanced PC Speaker and COVOX sound via interrupt
Outputting to the screen
First, be aware of the MSDOS memory layout
Outputting in Textmode (80x25)
Hello World / High Level function
Here's an obligatory "Hello World" program in text mode, using a "high level" MS-DOS function. With a small optimization already included (using
XCHG BP,AX instead of
MOV AH,09h), this snippet is 20 bytes in size.
org 100h ; we start at CS:100h xchg bp,ax ; already a trick, puts 09h into AH mov dx,text ; DX expects the adress of a $ terminated string int 21h ; call the DOS function (AH = 09h) ret ; quit text: db 'Hello World!$'
Of course, this gets shorter with each byte you remove from the text itself. Now let's look into arbitrary screen access. Right after the start of your program you are in mode 3, that is 80x25 in 16 colors. See the Video Modes List
Low level access
The following three snippets showcase how to draw a red smiley in three different ways. All example snippets are meant to be standalone programs, starting with the first instruction and nothing before it. The target coordinate (40,12) is about the middle of the screen. We need a multiplier 2 since one char needs two bytes in memory (char and color is a byte each). The high byte 0x04 means red (4) on black (0) while the 0x01 is the first ASCII char - a smiley.
push 0xb800 pop ds mov bx,(80*12+40)*2 mov ax, 0x0401 mov [bx],ax ret
push 0xb800 pop es mov di,(80*12+40)*2 mov ax, 0x0401 stosw ret
push ss push 0xb800 pop ss mov sp,(80*12+40)*2 mov ax, 0x0401 push ax pop ss int 0x20
You might notice that the push <word> + pop seg_reg combination is always the same and occupies four bytes alltogether. If correct alignment is not important to you and you really just want any pointer to the screen, there is another way to get a valid one:
les bx,[si] nop stosb
That's also four bytes, but it already has the
stosb opcode (for putting something onto the screen) integrated and even one slot free for another one-byte-instruction. It works because
SI initially points to the start of our code, and
stosb has the hexadecimal representation of
0AAh. After the first command, the segment register
ES contains the value
0AA90h. If you repeatedly write something to the screen with
stosb you will eventually reach the
0B800h segment and chars will appear on the screen. With a careful selection of the free one-byte-opcode you can also reintroduce some alignment. This works also with the
Alternative high level functions
Besides the direct way of accessing memory there are also other ways of bringing char to the screen (f.e)
Outputting in mode 13h (320x200)
Basic pixel output
The videomemory for mode 13h is located at segment 0xA000, so you need to assign this value to a segment register. Also, after the start of your program you are normally still in textmode, so you need to switch to the videomode. The following snippet does both:
mov al,0x13 int 0x10 ; AH = 0 means : set video mode to AL = 0x13 (320 x 200 pixels in 256 colors) push 0xA000 ; put value on the stack pop es ; pop the top stack value into segment register ES
You're free to use any of the segment register / opcode combinations to write to the screen
Let's add some code that actually draws something on the screen, the following program occupies 23 bytes and draws a fullscreen XOR texture
mov al,0x13 int 0x10 push 0xa000 pop es X: cwd ; "clear" DX (if AH < 0x7F) mov ax,di ; get screen position into AX mov bx,320 ; get screen width into BX div bx ; divide, to get row and column xor ax,dx ; the famous XOR pattern and al,32+8 ; a more interesting variation of it stosb ; finally, draw to the screen jmp short X ; rinse and repeat
Note that there is a different way of preparing the segment register, instead of :
push 0xa000 pop es
you can also do :
mov ah,0xA0 mov es,ax
both variations occupy 4 bytes, but the latter is executable on processor architectures where push <word> is not available.
Alternative way of pixel plotting and optimization
Now let's optimize on the snippet. First, we can adapt the "LES" trick from the textmode section. We just exchange
push 0xa000 pop es
to save two bytes. This works because BX is 0x0000 at start and thus, accesses the region before our code, which is called Program Segment Prefix. The two bytes that are put into the segment register ES are bytes 2 and 3 = "Segment of the first byte beyond the memory allocated to the program" which is usually 0x9FFF. That is just off by one to our desired 0xA000. Unfortunately that means a 16 pixel offset, so if screen alignment means something to you, you can't use this optimization. Also, said two bytes are not always 0x9FFF; for example, if resident programs are above the "memory allocated to the program" (FreeDos), their content is overwritten if we take their base as our video memory base.
Second, we can use an alternative way of putting pixels to the screen, subfunction AH = 0x0C of int 0x10. Also, instead of constructing row and column from the screen pointer, we can use some interesting properties of the screenwidth regarding logical operations. This results in the following 16 byte program:
cwd ; "clear" DX for perfect alignment mov al,0x13 X: int 0x10 ; set video mode AND draw pixel inc cx ; increment column mov ax,cx ; get column in AH xor al,ah ; the famous XOR pattern mov ah,0x0C ; set subfunction "set pixel" for int 0x10 and al,32+8 ; a more interesting variation of it jmp short X ; rinse and repeat
The first optimization is the double usage of the same "int 0x10" as setting the videomode and drawing the pixel. The subfunction AH = 0x0C expects row and column in DX and CX. Since the screenwidth is 320, which is 5 * 64, we can ignore the row and just works with the column, if we use logical operations and just use bit 0-6 of the result. The subfunction AH = 0x0C allows for unbounded column values in CX (up to 65535) and correctly "wraps" it internally without an error.
The major drawback of the "subfunction AH = 0x0C" approach is performance loss. While DosBox and many emulators perform just fine, real hardware will draw much much slower based on the Video BIOS.
Basic animation and user interaction
Now let's add the convenient check for the ESC key and also add a simple animation. The
DI register is used as frame counter and incremented after the pixel counter
CX ran through all 65536 values via
LOOP. This frame counter is then added to the column. The resulting program is now 25 bytes in size :
cwd ; "clear" DX for perfect alignment mov al,0x13 X: int 0x10 ; set video mode AND draw pixel mov ax,cx ; get column in AH add ax,di ; offset by framecounter xor al,ah ; the famous XOR pattern and al,32+8 ; a more interesting variation of it mov ah,0x0C ; set subfunction "set pixel" for int 0x10 loop X ; loop 65536 times inc di ; increment framecounter in al,0x60 ; check keyboard ... dec al ; ... for ESC jnz X ; rinse and repeat ret ; quit program
( ↑ This example is the blueprint in the FPU Basics Section.)
Sometimes, when the default MCGA palette doesn't quite match the look you are looking for, it can be useful to set your own palette using the VGA registers, the basic setup loop looks like this:
palloop: mov ax,cx mov dx,0x3c8 out dx,al ; select palette color inc dx out dx,al ; write red value (0..63) out dx,al ; write green value (0..63) out dx,al ; write blue value (0..63) loop palloop
The above code sets a simple grayscale palette, assumes CX Register to be at 0) and is compatible with all DOS platforms.
In some cases you can ommit the
mov dx,0x3c8, out dx,al, inc dx and directly access the data register by just using
mov dx,0x3c9 instead
Creating sounds with MIDI requires a bit more preparation, but once you're familiar with it, it's even simpler than PC Speaker sound, because you basically don't have to create the sound, you just have to trigger it. For the start, you have to know, that there is a lot of different instruments and a defined way of communication. Imagine the MIDI interface like a keyboard, you tell it which button/key you want to press, which knob to twist, and sometimes, how hard. Per default, the active instrument is the Acoustic Grand Piano.
Single piano note
Let's start of with a simple example, playing a single note on the piano :
mov al, 3Fh ; set UART mode - command mov dx, 331h ; MIDI Control Port out dx, al ; send ! dec dx ; MIDI Data Port ( = 330h ) mov al, 90h ; send note on channel ZERO - command out dx, al ; send ! mov al, 56h ; data byte 1 : KEY = 56h out dx, al ; send ! mov al, 67h ; data byte 2 : VOLUME = 67h out dx, al ; send ! ret ; quit
In short: you turn your keyboard on (switching to UART mode), then press a KEY with a certain VOLUME on channel ZERO, then exit. Besides switching to UART mode, all this communication uses the port
330h. This example will work on DosBox but not on Windows XP NTVDM: for still unclear reasons, the NTVDM emulation delays the note until it receives a second one. The simplest way of at least hearing something is to repeatedly play notes, like in the following example :
Repeated piano notes
mov al, 3Fh ; set UART mode - command mov dx, 331h ; MIDI Control Port out dx, al ; send ! dec dx ; MIDI Data Port ( = 330h ) main: mov al, 90h ; send note on channel 0 - command out dx, al ; send ! mov al, 56h ; data byte 1 : KEY = 56h out dx, al ; send ! mov al, 67h ; data byte 2 : VOLUME = 67h out dx, al ; send ! _wait: mov al, [fs:0x46c] ; read timer test al, 3 ; skip 3 values jnz _wait ; inc byte [fs:0x46c] ; inc manually to prevent retrigger in al, 0x60 ; check for ESC dec al ; jnz main ; no? repeat ret ; quit
↑ This is the previous example, enriched with synchronizing against the timer and checking for the ESC key. It works on both DosBox and Windows XP NTVDM and plays a note on the Piano repeatedly.
Repeated notes of other instruments
While hitting one key repeatedly is not really interesting in general, it can produce decent results when doing it with the right instrument activated, like it was done with the "French Horn" in Timelord (by Baudsurfer). Apart from just changing the instrument, let's also optimize a little bit on the size:
org 100h start: mov si,data ; init pointer for outsb mov dx,330h ; change to data port mov cl,5 ; play our music data rep outsb ; (see below at "data" label) inc dx ; switch to control port outsb ; change to mode "UART" _wait: mov al,[fs:0x46c] ; read timer value cmp al,bl ; wait until... jz _wait ; ...timer value changed xchg bx,ax ; save old timer value in al,0x60 ; check for ... dec al ; ... ESC key jnz start ; otherwise : repeat dec dx ; switch to data port again outsb ; stop all ... outsb ; ... notes played ... outsb ; ... on channel 3 data: db 0c3h ; change instrument on channel 3 ; (is also "RET" for program quit) db 60 ; to "French Horn" db 93h ; play note on channel 3 db 35 ; deep "b" = note number 35 db 127 ; play with volume = 127 db 3fh ; change mode to "UART" db 0b3h ; control change on channel 3 db 123 ; Channel Mode Message "All Notes Off"
↑ This is the previous example, with changed instrument, structuring the MIDI data into a data section, optimizing the output with the usage of
outsb instead of
out dx,al, and finalizing the program with a special command to turn All Notes Off. This is necessary for all instruments which don't stop by themself. In all the previous examples, we sent the "NOTE ON" command (
9Xh), but not the according "NOTE OFF" command (
8Xh). Also, the note is now played on channel
03h, since the commandbyte for changing an instrument on channel 3 is
0C3h which is also
RET and can be reused. If this looks complicated at first, always remember, it's just sending defined commands to a single port.
The drum channel
Now, that you're aware that there are different channels (overall: 16) to play notes on, how would you like a channel
09h specifically for 'Drums' ? Ten different drumsets with dozens of samples are available out of the box. Per default, the "Standard Kit" is active. The following example plays a track of drum notes repeatedly, while further optimizing for size :
org 100h aas ; 3fh = "set UART mode" cwd ; 99h = "play note on drum channel" command db 42,38,42,35 ; the drum notes (kick, snare, hihat) mov dx,0x331 ; MIDI Control Port outsb ; send "set UART mode" dec dx ; switch to MIDI data port outsb ; send "play note on drum channel" command main: mov al,[fs:0x46c] ; read timer test al,3 jnz main ; skip 3 values inc byte [fs:0x46c] ; inc manually to prevent retrigger inc bx ; increment note counter and bl,3 ; truncate to 4 notes mov al,[bx+si] ; read the drumnote (see above) out dx,al ; send the drum mov al,127 ; set volume to maximum out dx,al ; send volume in al,0x60 ; check for ESC dec al ; jnz main ; no? repeat ret ; otherwise quit
In contrast to the previous example, the data section is now at the start. That means, it's executed as code! This is dangerous of course, but also saves bytes on assigning the
DATA offset to
SI initially two times, it is fixed and further reading from the drumdata is done with
[BX+SI]. Unless you know exactly what you are doing, don't use that kind of "executing data" optimization!". In this special case
CWD do no harm and the drum notes
42,38,42,35 are carefully crafted and arranged to resemble the instruction
SUB AH,[232Ah] which does no harm either.
Further Midi instrument tuning by controllers and pitch
If you are familiar with hardware synthesizers you'll definitely remember the typical pitch bend or modulation wheels beside the keys, usually two of them. Those are commonly assigned to a vibrato/tremolo effect and a +/-pitch to tune the played note. You can also use those functions in your intro code to affect the currently played midi instrument note.
To access these parameters the coding follows the usual midi programming like you can see here:
mov al,10110000b ;Controller command on Midi channel 0 out dx,al mov al,00000001b ;0...127 data byte 1 => '1' is the code for the modulation wheel typically assigned to vibrato/tremolo out dx,al mov al,01111111b ;0...127 data byte 2 => e.g. '01111111' => Maximum vibrato level out dx,al
In that example the maximum vibrato level is assigned to any instrument played on midi channel 0. This effect was used in the Crystal Comet 128 Byte intro by Kuemmel.
For pitch bend the code would be like:
mov al,11100000b ;Pitch bend command on Midi channel 0 out dx,al mov al,0lllllllb ;0...127 data byte 1 => LSB value for pitch out dx,al mov al,0mmmmmmmb ;0...127 data byte 2 => MSB value for pitch out dx,al
Pitch bend uses a 14 Bit value. The center is at 0x2000 (meaning no pitch). Numbers from 0x2000 up to 0x3fff increase the pitch and from 0x2000 down to 0x0000 will decrease it. The range of 0x2000 should refer to 2 semitones. So you can bend +/- 2 semitones. Please be aware that those values must be converted to two 7 Bit values. Therefore e.g. 0x3000 would be 0x60 (MSB) and 0x00 (LSB).
Of course there are more midi controller options, e.g. you could change the stereo pan level. As a reference and for more detailed information please have a look at this Midi tutorial page.
Creating basic sound effects in 16 bytes
In the MIDI repertoire, there are already some sound effects available. With the "data execution" optimization above, let's fire a gunshot in 16 bytes :
aas les di,[bx-0x6C] xor al,127 mov dx,0x331 outsb dec dx mov cl,5 rep outsb ret
The first three instructions don't do anything (they do, but we don't care), it's just MIDI data.
the command for switching to "UART" mode, for sending to port
0xc4 (change instrument on channel 4),
0x7F (change it to "Gunshot"),
0x94 (play note on channel 4)
0x34 (play THIS note),
0x7f (play it THAT loud, 127 is also the allowed maximum)
The rest of the code basically just sends the MIDI data to the interface and exits. You can change the kind of sound effect with modifying the modbyte of the second instruction (change BX to BP or SI etc.). Changing the volume is more simple, change the byte value of
xor al,127 to any value between 0 and 127.
Procedural MIDI music generation in 64 bytes
With all the above you should now be able to follow the next snippet Descent OST, a small framework for procedural MIDI sound generation in 64 bytes :
; "Descent OST", a 62 byte MIDI music player for MSDOS ; created by HellMood/DESiRE (C)2015 ; this is the extracted music routine used in "Descent" ; it is a procedural MIDI algorithm which sticks a ; subroutine to the DOS timer (interrupt 0x1C) ; the registered routine is called ~18.2 times per second ; developed for use with "NASM", ; see http://sourceforge.net/projects/nasm/files/ %define rhythmPattern 0b11 ; with "rhythmPattern", you define how often a note is played ; generally, higher values and values containing many "ones" ; in binary representation, will result in faster play ; for example "0b11" will play every 4th note %define baseInstrument 9 ; defines the number of the first instrument used. ; see http://www.midi.org/techspecs/gm1sound.php for a full list ; keep in mind, that there are only a few instrument blocks ; whose sounds stop after a while. You won't get good results ; from strings etc. just a mess of overlayed sounds %define numInstruments 7 ; defines how many instrument are used. keep in mind, that "rhythm- ; Pattern" has influence on the picked instrument. the instruments ; from 9 to 9+7 are called "chromatic percussion" %define noteStep 5 ; defines the basic difference from on note to the next. recommended ; values here are (mainly) 3,4 and 5 for music theoretic reasons ; but feel free to play around =) %define noteRange 12 ; after adding the noteStep, the note value is "mod"ded with ; the "noteRange". 12 means octave, which results in very harmonic ; scales %define noteSpread 3 ; the third step spreads the notes over the tonal spectrum, you may ; want to keep "noteSpread" * "noteRange" round about 30-60. %define baseNote 40 ; the general tone height of everything. some instruments don't play ; arbitrary deep notes correctly, and too high notes cause ear bleeding ; adjust with care ;) ; WARNING : after exiting the program, the timer interrupt is still active ; i strongly recommend to reboot or restart DOSBOX! ; ADVISE : Yes, there are music- and math-related things going on here ; if you're not into music theory, cycle of fifth, and the like, it maybe ; better to just play around with the parameters, rather then understanding them ; just change stuff slowly, and eventually you will get "there" ; wherever that is ;) org 0x100 xchg cx,ax ; set our second counter to zero mov dx,music mov ax,0x251C ; mode "0x25" , "0x1C" = change address of timer interrupt int 0x21 ; see http://mprolab.teipir.gr/vivlio80X86/dosints.pdf S: in ax,0x60 ; wait for "ESC" press, then exit dec al ; music plays on anyway, this is just for jnz S ; keeping the music exactly as in "Descent" ret ; return to prompt music: inc bx ; increment our first counter (starts at zero) test bl,byte rhythmPattern ; play a note every 4th time tick jnz nomusic ; otherwise do nothing mov dx,0x331 mov al,0x3F out dx,al dec dx mov al,0xC0 ; change instrument on channel 0... out dx,al mov ax,bx aam byte numInstruments add al,byte baseInstrument ; ...to this instrument out dx,al mov al,0x90 ; play note on channel 0 ... out dx,al add cl,byte noteStep mov al,cl aam byte noteRange imul ax,noteSpread add al,baseNote ; ... play THIS note out dx,al neg al ; (play deeper notes louder = add bass) add al,127+39 ; ... play it THAT loud out dx,al nomusic: iret
Producing sound with PC speakers is incredibly easy. Basically, you set a system timer to a desired frequency, then connect this timer to the speaker. The PC Speaker Article from OSDEV Wiki has the details about it. An example for a tiny intro that uses PC speaker music is SpeaCore
Basic example with melody pattern
A very optimized and dirty variant of producing sound with the speaker is this 12 byte snippet (sound routine from the tiny intro "darkweb"):
hlt ; sync to timer1 inc bx ; increment our counter mov ax,bx ; work with a copy or al,0x4B ; melody pattern + 2 LSB for speaker link out 0x42,al ; set new countdown for timer2 (two passes) out 0x61,al ; link timer2 to PC speaker (2 LSBs are 1) jmp si ; rinse and repeat
Instead of sending low and high byte of our divisor directly in succession, we do it the "two path" way. That reduces the amount of possible frequencies to 255, which is still good enough for some rough sounds. Linking the timer to the PC speaker might not be obvious : Normally you would read the value of port 0x61, set the two least significant bits to TRUE and write the value again. You can save on all of this, if you just send the "two path" value which you just used for the timer if that value has the two least significant bits already set (or al,0x4B does this). Be aware that port 0x61 does many things apart from just connecting the timer to the speaker. A useful resource for ports in general is the Bochs Ports List, for port 0x61 it displays:
0061 w KB controller port B (ISA, EISA) (PS/2 port A is at 0092)
system control port for compatibility with 8255
bit 7 (1= IRQ 0 reset )
bit 6-4 reserved
bit 3 = 1 channel check enable
bit 2 = 1 parity check enable
bit 1 = 1 speaker data enable
bit 0 = 1 timer 2 gate to speaker enable
So if you experience strange things with highly optimized pc speaker output, revert to the safe way. The described way works with real hardware and DosBox. Unfortunately, both Orcacle Virtual Box with MsDos 6.22 and Windows XP NTVDM seem not to properly emulate PC speakers (Investigation and citation needed here!)
Simple deep sound in 8 bytes
One of the smallest possible PC speaker sound generation might be this 8 byte snippet :
dec ax ; AX initially 0000h -> AL = 0xFF out 42h,al ; change divisor of timer2 to 0xFFFF out 42h,al ; resulting in a very low frequency out 61h,al ; 2 LSBs are set, connect timer to speaker ret ; quit
(Note: This may fail on actual hardware, as there might not be time for the bus to settle between the consecutive
out 42h,al statements.)
COVOX output (aka LPT DAC)
Advanced PC Speaker and COVOX sound via interrupt
For a more advanced use of PC Speaker or COVOX sound output for tiny intros, also regarding a specific timing to a desired sample frequency playback, the use of an interrupt timer is recommended. To illustrate this we take a so called bytebeat and make it into a workable code example for PC Speaker and COVOX.
The major difference between the two is that COVOX has the benefit of a precision of 8 bits and PC Speaker usually only 6 bits. Furthermore the setup/access is different as shown in the sections before. Regarding size of the code and quality of the sound COVOX is preferable.
Bytebeat code like this can be directly ported to assembler by evaluating the single expressions step by step as you can see in the implementations here. Those examples work within DOSBox and should also run on real hardware with FreeDOS. It doesn't show any graphical output, it just plays the bytebeat until a key is pressed. Your graphics routine should be placed right after the 'main' label.
PC Speaker variant
org 100h mov ax,3508h ;21h, ah=35h get interrupt handler | al=08h interrupt number (PIT timer) int 21h ;return: es:bx push es push bx ;backup current interrupt handler mov cx,63 + 108*256 ;PIT counter divisor = 108 and speaker enable for init mov bl,90h ;10010000b => on "init" ;Bit0 = 0 counter 16 Bits set ;Bit3-1 = 000 mode 0 select ;Bit5-4 = 01 read/write counter bits 0-7 only ;Bit7-6 = 10 counter 2 select mov dx,irq ;new handler address call init main: mov ah,0 int 16h ;ah = 0, int16h => read keypress pop dx pop ds ;restore handler address at exit xor cx,cx ;PIT counter divisor = 0 and speaker disable for exit mov bl,0b6h ;bl = 10110110b => at exit init: xchg ax,cx out 61h,al ;al = 0 or 63 => Bit0 = 1 timer 2 gate to speaker enable, mov al,ah ;Bit1 = 1 speaker data enable ...or disable both at al = 0 out 40h,al ;al = 0 or 108 => write PIT counter 0 divisor salc out 40h,al ;al = 0 => write PIT counter 0 divisor again = 0 high byte ;=> this results in a frequency for the interrupt call of 11025 Hz. ;as clock is 1,19318181818 MHz => 1,19318181818 MHz / 108 = 11025 Hz xchg ax,bx ;al=bl = 10110110b out 43h,al ;Bit0 = 0 counter 16 Bits set ;Bit3-1 = 011 mode 3 select, square wave generator ;Bit5-4 = 11 read/write counter bits 0-7 first, then 8-15 ;Bit7-6 = 10 counter 2 select mov ax,2508h ;21h, ah=25h set interrupt handler | al=08h interrupt number (PIT timer) int 21h retn ;bytebeat: ((t&4096)?((t*(t^t%255)|(t>>4))>>1):(t>>3)|((t&8192)?t<<2:t)) irq: pusha mov bp,255 mov ax,0 ;ax: t .counter: mov cx,ax shr cx,3 ;cx: (t>>3) test ax,4096 ;(t&4096)? jz .1 mov bx,ax ;bx: t sub dx,dx ;dx:ax t div bp ;dx: (t%255) xor dx,bx ;dx: (t^(t%255)) shr cx,1 ;cx: (t>>4) xchg ax,bx ;ax: t mul dx ;ax: t*(t^(t%255)) or ax,cx ;ax: t*(t^(t%255))|(t>>4) shr ax,1 ;ax: (t*(t^(t%255))|(t>>4))>>1 jmp .3 .1: test ax,8192 ;(t&8192)? jz .2 shl ax,2 ;ax: (t<<2) .2: or ax,cx ;ax: ax|(t>>3) .3: shr al,2 ;downscale to 6 bits jz .4 out 42h,al ;write 6 Bit data to speaker (PIT counter 2) .4: inc word [bp-255+irq.counter-2] mov al,20h ;00100000b out 20h,al ;Bit 5 = 1 send End Of Interrupt (EOI) signal popa iret
org 100h mov ax,3508h ;21h, ah=35h get interrupt handler | al=08h interrupt number (PIT timer) int 21h ;return: es:bx push es push bx ;backup current interrupt handler mov al,108 ;PIT counter divisor mov dx,irq ;new handler address call init main: mov ah,0 int 16h ;ah = 0, int16h => read keypress pop dx pop ds ;restore handler address at exit salc ;al = 0 at exit init: out 40h,al ;al = 0 or 108 => write PIT counter 0 divisor = 108 low byte salc out 40h,al ;al = 0 => write PIT counter 0 divisor again = 0 high byte ;=> this results in a frequency for the interrupt call of 11025 Hz. ;as clock is 1,19318181818 MHz => 1,19318181818 MHz / 108 = 11025 Hz mov ax,2508h ;21h, ah=25h set interrupt handler | al=08h interrupt number (PIT timer) int 21h retn ;bytebeat: ((t&4096)?((t*(t^t%255)|(t>>4))>>1):(t>>3)|((t&8192)?t<<2:t)) irq: pusha mov bp,255 mov ax,0 ;ax: t .counter: mov cx,ax shr cx,3 ;cx: (t>>3) test ax,4096 ;(t&4096)? jz .1 mov bx,ax ;bx: t sub dx,dx ;dx: ax t div bp ;dx: (t%255) xor dx,bx ;dx: (t^(t%255)) shr cx,1 ;cx: (t>>4) xchg ax,bx ;ax: t mul dx ;ax: t*(t^(t%255)) or ax,cx ;ax: t*(t^(t%255))|(t>>4) shr ax,1 ;ax: (t*(t^(t%255))|(t>>4))>>1 jmp .3 .1: test ax,8192 ;(t&8192)? jz .2 shl ax,2 ;ax: (t<<2) .2: or ax,cx ;ax: ax|(t>>3) .3: mov dx,0378h ;LPT1 parallel port address out dx,al ;write 8 Bit sample data inc word[bp-255+irq.counter-2] mov al,20h ;00100000b out 20h,al ;Bit 5 = 1 send End Of Interrupt (EOI) signal popa iret
Further notes on the two variants
It's important to set and know the sample frequency you want. E.g. if you want to port the frequency from 11025 Hz to e.g. 18939 Hz for the same sound you need to change the following code parts e.g. for COVOX. Pay attention that also the bytebeat parameters where adjusted to fit more or less the double frequency:
;...snip... mov al,63 ;PIT counter divisor instead of 108 => 1,19318181818 MHz / 63 = 18939 Hz ;...snip... ;bytebeat: ((t&8192)?((t*(t^t%255)|(t>>5))>>1):(t>>4)|((t&16192)?t<<2:t)) ;...snip... .counter: mov cx,ax shr cx,4 ;cx: (t>>4) test ax,8192 ;(t&8192)? jz .1 mov bx,ax ;bx: t sub dx,dx ;dx:ax t div bp ;dx: (t%255) xor dx,bx ;dx: (t^(t%255)) shr cx,1 ;cx: (t>>5) xchg ax,bx ;ax: t mul dx ;ax: t*(t^(t%255)) or ax,cx ;ax: t*(t^(t%255))|(t>>4) shr ax,1 ;ax: (t*(t^(t%255))|(t>>4))>>1 jmp .3 .1: test ax,16384 ;(t&16384)? jz .2 shl ax,2 ;ax: (t<<2) .2: or ax,cx ;ax: ax|(t>>3) ;...snip...
The routine here uses a frequency of 18939 Hz. So regarding the 16 bit timer used here this would result in a length of a maximum of 65535/18939 = 3.46 seconds before everything loops. Usually that would be enough for some drumbeat, but not for a complete song or melody. In that case you have to use another register as a 'top' timer to trigger your changes for the sound.
One more thing to check and maybe modify if you hear an imperfect sound is the timing regarding when a sample value is actually "played". Preferable you would want to play each sample value at exactly the same time. But as your sample generation routine might need a different amount of CPU cycles each time the interrupt is called this can differ all the time, when code is used like above.
One solution for this is to play the sample calculated from the last interrupt call right away when the interrupt is called the next time. You can do that via self-modifying code like shown here. It takes 5 Bytes more:
;...snip... irq: pusha mov dx,0378h mov al,0 .sample: out dx,al mov bp,255 mov ax,0 ; ax: t .counter: ;...snip... inc word [bp-255+irq.counter-2] mov byte [bp-255+irq.sample-1],al mov al,20h out 20h,al ;...snip...
Some remarks: All the code above is not optimized to the max regarding size due to educational reasons. Depending on your code and dependency of the interrupt subroutine you can do several size optimizations.
Instead of using the interrupt
08 theoretically the user defined interrupt number
1c could be
used also, but by now this seems to work only with DOSBox but not on a real system with FreeDOS. Further tests
are needed to see what is the problem here. The use of interrupt
1c would save 4 bytes as the following
code lines to finalize the interrupt could be omitted in the examples above:
;...snip... mov al,20h out 20h,al ;...snip...
Some basic waveforms can be encoded like this:
;sawtooth wave t & 127
;square wave t & 128
;triangle wave t ^ ((t & 128) * 127)
How would you go from here to create a specific tone, e.g. an "A4", which would have a frequency of 440 Hz (Check this
link to get a list for the frequencies of the notes) ?
For that you have to relate the set frequency of the interrupt to the tone frequency and the length of one wave of your
wave generator. If we have a sawtooth of
t&127 at 22050 Hz this would result in a tone of 22050/128 = 172.3 Hz.
To reach 440 Hz we can simply stretch/multiply the timer by 440/172.3 = 2.554 to hear the desired note:
(t*2.554) & 127
Of course there are endless possibilities and the whole world of real time sound calculation/generation is open to you. Here are some tiny intros which use this techniques already: Plasmifier cover 256B, 2(56)unlimited, somehow.